SpaceTreasures.com
miga
Research and Development, Inc.
Acrylic Base and other Accessories
Item CLH1 $.35 each
Clear Label Holder
- for 3/8" posts. Front measures about 1" wide by 7/8" high. Does not
include front feet (CRF1). |
Item M1 $.55each Magnet 3/8" diameter x 1/8" thick BLACK Grade N42. Pull = 5.1 pounds. For use WITH M3 on top of All 3/8" Polycarbonate posts. |
|
Magnet 1/4" diameter x 1/4" thick Grade N42. Pull = 6.2 pounds. For use inside All 3/8" Polycarbonate posts. |
|
|
Polycarbonate Post - material 3/8" diameter x 1.25" tall ASSEMBLED with M3 & M1 magnets. |
Magnet 1/2" diameter x 1/8" thick Grade N42. Pull = 6.6 pounds. For use with or without M3 on top of All 3/8" Polycarbonate posts. |
|
Polycarbonate Post - material 3/8" diameter x 2.5" tall. Medium tall height. One end formed to hold (M3) 1/4" diameter magnet tightly. |
Item M6 $1.95each
Magnet 5/8" diameter x 3/8" thick Grade N42. Pull = 25 pounds. For use with or without M3 on top of All 3/8" Polycarbonate posts. |
| Polycarbonate Post - material 3/8" diameter x 3.65" tall. Tall height. One end formed to hold (M3) 1/4" diameter magnet tightly. |
Magnet 1" diameter x 1/8" thick Grade N42. Pull = 14 pounds. For use with or without M3 on top of All 3/8" Polycarbonate posts. |
|
Clear Rubber Feet - 1/4" diameter. Set of four For use on bottoms of bases and front edge of (CLH1) Clear Label Holder. |
Stabilization Clip with magnets Grade N42 for all 3/8” posts, set of four |
Small Brass Easel with 3 magnets - 4' tall. Set of two. |
Large Brass Easel with 3 magnets
- 7" tall. Set of two . |
Small Black Wire Easel with 3 magnets - 3" high. Set of two. |
Large Black Wire Easel with 3 magnets - 6" high. Set of two. |